Die Stecklinge sind da! Was soll ich jetzt tun?

The cuttings are here! What should I do now?

1. Open the package & unpack cuttings correctly

Don't wait long after delivery

After delivery, the plants should not remain in the dark shipping box longer than necessary. Therefore, open the package as soon as possible after receipt.

Proceed as follows:

  • Carefully cut open all adhesive strips with a knife
  • Carefully open the box
  • Remove the green shipping containers as well as any goodies and the delivery note
  • Set the containers aside safely until your pots are prepared

Depending on the order, a shipping container can hold 3 or 6 cuttings.

Safely open shipping blister

Once your pots are ready, you can open the containers.

  • Carefully pull on the sides of the blister
  • The fasteners will release from the holder
  • Inside, the cuttings are fixed with a wedge to ensure safe transport

Now your clones are ready for potting.

Note the strain identification

For clear traceability, each plant is marked:

  • For mixed orders directly on the stem with a plant label
  • For identical varieties, on the shipping container

2. Potting cuttings – The perfect start

Prepare a separate pot for each cutting with a suitable substrate (except for Living Soil Beds). Ideally, all pots should already be prepared.

Insert step by step

  1. Make a planting hole in the center of the substrate
  2. Add some mycorrhiza powder directly into the hole
  3. Carefully remove the cutting from the shipping wedge
  4. Remove the plant label
  5. Place the clone, including the wedge, into the planting hole
  6. Lightly press down the substrate
  7. Stick the label next to the plant in the medium

Important note

Do not place the label directly at the rim of the pot, as gaps may form when it dries out.

Legal notice

From the moment of potting, the cutting legally becomes a cannabis plant according to the KCanG.


3. Watering correctly – A lot is decided now

In the first few days: Less is more

This is where most mistakes happen. Freshly planted cuttings initially need very little water.

Recommendation:

  • Only water about 2–5% of the pot volume
  • Then wait until the area is noticeably dry again
  • This can take 1 to 3 days depending on the setup

Why too much water is problematic

Overly wet substrate displaces oxygen in the root area. This can cause the young roots in the wedge to rot instead of growing into the new medium.

The consequences:

  • Stunted growth
  • Yellow leaves
  • Nutrient problems
  • Stress reactions

Therefore, especially in the first few days: Better a little too dry than too wet.


4. Optimally adjust light & climate

Our cuttings are kept under low light intensity. Therefore, they should not be exposed to full power immediately after shipping.

Increase light slowly

  • Dim the lamp or hang it higher
  • Only gradually increase after visible growth
  • New shoots = good sign of adaptation

Warning signs of light stress

  • Drooping leaves
  • Purple stems
  • Slowed growth

Optimal conditions for rooting

For the first few days, we recommend:

  • 25–27 °C temperature
  • 60–65% humidity

After successful acclimation, the climate can be gradually adjusted.


5. Apply nutrients correctly

So that the plants do not have to live off their reserves, a light growth nutrient application is recommended even with the first watering.

Our cuttings are accustomed to an EC value of approx. 1.4.

Mineral or organic fertilization?

Mineral:

  • Immediately available
  • Quick adaptation
  • Direct supply

Organic:

  • Also possible
  • Transition can take a few days
  • Patience needed

Since organic systems work differently, microorganisms need some time to make nutrients plant-available.


6. Extra tips for quick recovery

Especially after transport, supportive products can be helpful:

  • Foliar Sprays
  • Kelp extracts
  • Effective microorganisms
  • Ferments
  • Stress-reducing plant aids

These can help to reduce transport stress and accelerate rooting.


The most important points summarized

If you follow the points below, your cuttings will have the best possible start:

  • Unpack quickly
  • Pot carefully
  • Water very sparingly
  • Little light at the beginning
  • Create a warm, stable climate
  • Fertilize lightly
  • Be patient

Golden Rule:

The first few days determine the next few weeks. Those who work calmly, cleanly, and controllably now lay the foundation for healthy, vigorous plants.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.